Unified inch · UNEF
5/8-24 UNEF tap drill size
For general work, OSG suggests 65–70% of full thread. Harder materials and deep holes want less; the calculator sets it from your material.
Cut tap
19/32
0.5938" · 58% thread
Form tap
39/64
0.6094" · 55% thread
Pick your material for its % of thread, tapping RPM and the rigid-tap code.
Thread dimensions
- Major Ø
- 0.6250" (15.875 mm)
- Threads per inch
- 24 (pitch 0.0417")
- Pitch Ø (basic)
- 0.5979" (15.188 mm)
- Minor Ø (internal, basic)
- 0.5799" (14.729 mm)
- Thread depth (internal)
- 0.0226" (0.573 mm)
Basic sizes of the 60° form. Tolerance classes (2B/3B) set the limits around them.
Cut tap drills
For a cutting (fluted or spiral) tap. Every standard drill from 50% to 85% thread; suggested rows are in the 65–70% band.
| Drill | Ø in | Ø mm | Thread |
|---|---|---|---|
| 15 mm | 0.5906 | 15.00 | 64% |
| 19/32 | 0.5938 | 15.08 | 58% |
Form tap drills
A form (roll) tap displaces metal instead of cutting it, so it needs a bigger hole. Every standard drill from 50% to 85% thread; suggested rows are in the 65–70% band.
| Drill | Ø in | Ø mm | Thread |
|---|---|---|---|
| 39/64 | 0.6094 | 15.48 | 55% |
| 15.5 mm | 0.6102 | 15.50 | 52% |
3-wire measurement
- Best wire size
- 0.0241" (0.611 mm)
- Over wires, at basic pitch Ø
- 0.6340" (16.104 mm)
For the external thread (the screw). The best wire touches the flanks at the pitch diameter.
Sources
- ASME B1.1 — Unified Inch Screw Threads (UN and UNR thread form)
- OSG — Tap drill size and pitch diameter limit chart (formula, suggested % of full thread)
- Cutting Tool Engineering — "Threads will roll": form tap hole size = D − 0.0068 × % / TPI
- ASME B94.11M — Twist drills (fractional, number, letter and metric sizes)
- NIST (NBS) Letter Circular 23 and Pratt & Whitney — three-wire thread measurement, best wire size